Our products are PC-based and packages include both hardware and software. They can be installed on a desktop or laptop machine running a Windows operating system -- such as Windows XP, Vista or Windows 7. With the exception of AirSleuth, all software runs on both 32- and 64-bit platforms.  AirSleuth runs on 32-bit platforms only.

WifiEagle and AirSleuth:
For evaluation purposes feel free to download the software application from here. Without our wireless device the application runs in a fully functional 'Demo mode' using simulated data.

NetSurveyor Professional:
Download NetSurveyor Professional from here and try it for free. The fully-functional trial version will allow you to launch the application ten (10) times. After the trial period ends then an activation code will be required to run the application.


System Requirements:
● PC running a Windows operating system: Windows XP, Vista or Windows 7
● Microsoft .NET Framework version 3.0 (or later)
● A minimum of 300 MB available hard disk space (for data recording)
● An available USB port for the USB wireless device or an available 16-bit PCMCIA Type II (or compatible) slot for the PC Card wireless device.  Note: This does not apply to NetSurveyor-Pro, which is a software-only product.

	WifiEagle 2.4x and 5.x GHz Dual-Band Channel Analyzer WifiEagle represents a new and innovative series of PC-based, WiFi diagnostic tools used for installing, troubleshooting and monitoring 802.11 wireless networks and provide unprecedented visibility into the performance of a wireless network. These tools are unique in their use of 802.11 devices for predicting throughput performance for each 802.11 channel.  Package includes USB wireless device, application software, installation program and instructions. Dual-Band Model:   $349.95 USD + S/H Single-Band Model: $249.95 USD + S/H
	AirSleuth-Pro 2.4x GHz Spectrum Analyzer AirSleuth-Pro is a PC-based, spectrum analyzer that operates in the 2.4x GHz range of the RF spectrum. It is a professional tool used to monitor wireless devices and RF interference that impact the performance, range and security of wireless networks. Package includes USB or PCMCIA wireless device, application software, installation program and instructions. USB Model:       $395.00 USD + S/H PCMCIA Model: $395.00 USD + S/H USB PCMCIA
	NetSurveyor Professional - WiFi Connection / Performance Analyzer NetSurveyor Professional is a new type of diagnostic tool that puts a different spin on WiFi troubleshooting -- emphasizing performance metrics over measurements of RF signal strengths. It is used to test the performance and reliability of a WiFi network and help identify and troubleshoot problems. Furthermore, NetSurveyor-Pro also allows you to concurrently test multiple (up to five) WiFi connections. NetSurveyor-Pro is a software-only product that uses your 802.11 adapter(s) and access point(s) -- no additional proprietary hardware is required. Novices through experts will find NetSurveyor-Pro most useful when installing, testing, and troubleshooting 802.11 adapters and wireless networks. This is a software-only product that is delivered as a digital download.  Download NetSurveyor Professional and try it for free.  The fully-functional trial version will allow you to launch the application ten (10) times.  After the trial period ends then an activation code will be required to run the application. Single Computer License:  $34.95
	AirHORN 2.4x and 5.x GHz Channel / Signal Generator AirHORN Dual-Band is a unique, PC-based product that aids in testing WiFi antennas, RF shields and wireless networks. It is an RF (radio frequency) signal generator that covers the 2.4x and 5.x GHz ISM bands and was designed for microwave and RF applications. AirHORN transmits stable and accurate RF signals for each of the WiFi  (802.11) channels and is ideal for research and development of antenna design. A signal generation system is a key to any test system – AirHORN can be used for rapid evaluation of receiver performances.  Combined with an RF spectrum analyzer, you now have the tools to locate "dead spots" in any locale where a WiFi network is installed. Package includes USB wireless device, application software, installation program and instructions. Dual-Band Model:    $279.95 USD + S/H Single-Band Model:  $179.95 USD + S/H
	WifiCopper 802.11 Packet Injector WifiCopper is a unique, PC-based product that aids in testing WiFi wireless networks. It is used to create wireless traffic on a particular channel and at a known level (i.e. packets / sec) and size (i.e. bytes / packet) without the need of the client adapter associating with an access point.  This makes it much easier to measure the quality of the transmission and reception performance on a particular 802.11 channel.  Package includes USB wireless device, application software, installation program and instructions. Single-Band Model:  $179.95 USD + S/H

Bundle #1:   AirSleuth-Pro plus AirHORN	Professional Bundle #1 includes AirSleuth-Pro (USB or PCMCIA) plus AirHORN Single-Band Special:  $465.00 USD + S/H (You save $109.95 USD) USB PCMCIA
Bundle #2:   AirHORN plus WifiCopper Single-Band (2.4x GHz)	Professional Bundle #2 includes AirHORN Single-Band plus WifiCopper Special: $279.90 USD + S/H (You save $80.00 USD)
Bundle #3:   WifiEagle plus AirHORN Single-Band (2.4x GHz)	Professional Bundle #3 includes WifiEagle Single-Band plus AirHORN Single-Band Special:  $349.90 USD + S/H (You save $80.00 USD)
Bundle #4:   WifiEagle plus AirHORN Dual-Band (2.4x and 5.x GHz)	Professional Bundle #4 includes WifiEagle Dual-Band plus AirHORN Dual-Band Special: $509.90 USD + S/H (You save $120.00 USD)
Bundle #5:   AirSleuth-Pro plus WifiEagle plus AirHORN Dual-Band (2.4x and 5.x GHz)	Professional Bundle #5 includes AirSleuth-Pro (USB) plus WifiEagle Dual-Band plus AirHORN Dual-Band Special: $719.90 USD + S/H (You save $305.00 USD)
Bundle #6:   AirSleuth-Pro plus WifiEagle Dual-Band (2.4x and 5.x GHz)	Professional Bundle #6 includes AirSleuth-Pro (USB or PCMCIA) plus WifiEagle Dual-Band Special: $559.90 USD + S/H (You save $185.05 USD) USB PCMCIA

---